Compact, 1U Design
The Mini rack features a single slide-out shelf that is capable of mounting up to four Mac minis in a standard 19", 4-post rack enclosure. The front of the Mini rack features capture screws that serve two purposes—one to screw down to cage nuts (not supplied) in the rack and the other to serve as a grip to pull on should you need to slide the Mini rack shelf out to access the Mac minis.
The layout of the Mini rack allows cables from the front Mac minis to be routed down the center of the rack. Two cable management clips ensure the cabling stays put. There's also an optional to install at the rear of the rack.
The Mini rack can be installed in less than 5 minutes with no tools. Each rail securely engages the square hole rack posts and then the shelf is slid into place.
The design of the airflow ducting with the Mini rack ensures that all Mac minis are getting fresh, cool air from the front of the rack and that the exhaust is vented directly to the rear. Cool air is directed through four openings below the faceplate to the front and rear Mac minis. The cool air is separated by a base that also does double-duty as holders for the Mac minis. An additional inlet directs cool air above the Mac mins to cool the chassis and force the warmer exhaust air to the rear of the rack.
Mini rack: Features at a glance
• Mount from 1-4 Mac Minis per 1U.
• Powder-coated steel slide-out shelf with integrated base
• Left and right snap-in rails
• Integrated airflow ducting for optimal cooling
• All peripheral ports are accessible.
• Tool-less design requires no additional hardware.
**Square hole rack required
**Please note that as of April 2014, we've changed the cable management channels on the Mini rack to adhesive-backed clips. Photos on this web page may not reflect the Mini rack you receive.
• Rear cable tie-down bar
Size and weight:
• Depth: 24" (69cm)
• Width: 19" (48.2cm)
• Height: 1.7" (4.3cm)
• Weight: 15 lbs (6.8kg)